A 10-Point Plan for (Without Being Overwhelmed)

The Importance of Colors of Underground Utility Lines

Underground utilities can easily be identified today. However, a long time ago, it was difficult to identify these utility lines and so when people try to dig there were many risks involved. Although not completely eliminated, risks today have been reduced. If there is a need to dig the ground, it is very important that the utility lines first be identified. If you need to dig through a piece of land today, you are required by the OSHA to first identify or locate underground utilities. It is to prevent disaster. If you hit any of the underground utility lines while digging then you can be fatally injured. Services in the area where the lines are located can experience interruption. People can call 811 to prevent these incidents, before they proceed with digging their property. When the number is called, you can let the utility companies come out and mark their respective lines.

But, despite the marks, there will sill be accidents. Utility lines are struck every 6 minutes, some place. Traffic lights, wastewater pipes, telecommunication lines, etc. are affected when lines are struck. Public heath and safety is affected when this happens.

With the use of GPR or Ground Penetrating Radar, companies can locate utility lines. When locating utility lines underground, this machine makes it easy to do so. Companies can locate their utility lines if any property owner calls 811.

It is easier to identify underground utility lines today because they now use different colors for each utility. Here are the colors used for different utilities.

White lines are for proposed excavation sites. Area that will be excavated in the future are marked.

If you see pink lines, they are temporary survey markings. Surveyors use pink lines to mark off legal property boundaries.

Red lines are used to mark electric power lines, cable, conduit, and lighting cable. The color red is associated with fire and danger so it is just appropriate to use it for electrical works.

Yellow lines are used for gas, oil, steam, petroleum, and gaseous materials. The bright color yellow is used to be a warning sign since a natural gas leak can create a potentially disastrous situation.

If you see orange lines, then you should associate this with communication., alarm, signal lines, cable or conduit. Lines for potable water use blue lines. Reclaimed water, irrigation, and slurry lines used purple lines. If you see the color green, then it indicates sewer and drain lines. Hitting this line can truly derail any project for a long period of time.

Click here now if you want to learn more about the color coding of utility lines. Click here for more.

Partner post: check my source